VANITY TOPS

To maintain the beauty of your Coni-marble bathroom vanity top; wiping the surface with a damp soft cloth or towel is usually the only cleaning required. You may also use any mild, non-abrasive detergent. 
An occasional use of Gel Gloss will not only help to maintain the lustre of the surface, but also remove minor stains and scratches.
Please avoid the following: 
Heating elements such as curling irons should never be placed directly on the surface.
Glass jars or ceramic items should have felt pads glued to the bottoms to avoid scratching the surface.

SHOWERS & BATH TUBS


Coni-marble showers and bath tubs are very low maintenance. We recommend that you squeegee the walls after use to reduce the need for cleaning. This will also help the shower or tub area dry quickly which helps extend the life of the silicone. For general cleaning we recommend Orange Glow to remove any build-up of soap residue and body grease. CAUTION – rinse the shower base and tub thoroughly as Orange Glo will leave them slippery if not rinsed properly.

Polishing your Coni-marble with Gel-Gloss will produce the highest surface luster possible and leave a smooth surface that will help eliminate water spotting.

PLEASE NOTE

Hot water should not exceed 140°F/46°C as excessive hot water is not only unsafe but may cause material failure in drain area due to stress, especially when combined with an over-tightened drain. 
Do not use abrasive cleaners on any Coni-marble fixtures as it may damage the finish

 

Maintenance   Hints   Menu

AVIAN   Maintenance

Avian Solid Surfacing is a hard hygienic surfacing material which is designed to maintain its’ beauty and at the same time...

Coni-marble    Maintenance

VANITY TOPS To maintain the beauty of your Coni-marble bathroom vanity top; wiping the surface with a damp soft cloth or...

Quartz    Maintenance


Quartz Surfaces should be cleaned with pH-neutral, non-abrasive cleanser and rinsed with clear water. With Quartz Surfaces,...