CONI-MARBLE PRODUCT WARRANTY
The following warranty applies to products purchased and installed in the Coni-marble Mfg. service area of Southwestern Ontario.
The warranty is in effect only if product is proven defective due to faulty workmanship during manufacturing process only. Warranty is null and void if damage is caused by abuse, improper installation or if the water temperature exceeds 140 degrees Fahrenheit.
Coni-marble Manufacturing Inc. shall not be liable for removal or installation of any replacements or consequential damage. Warranty applies to the original purchaser only. Proof of purchase is necessary.
Warranty is 100% for 3 years
We at Coni-marble Manufacturing Inc. are proud of our excellent quality control, however, due to the hand-process of mixing the marble matrix, colours could vary somewhat in density, and therefore we cannot guarantee colour uniformity in all our products. Some of the raw materials used in the manufacturing of this product are mined and may contain impurities. This and other variables beyond our control may result in a slight variation in appearance from one lot to the next.
Important: It is the Dealer’s responsibility to ascertain the legitimacy of claim prior to investigation by Coni-marble Manufacturing Inc.
AVIAN SOLID SURFACING PRODUCT WARRANTY
Coni-marble Manufacturing Inc. (“Coni”) expressly warrants to the purchaser of AVIAN® solid surfacing material that Coni will, at its sole option, repair or replace such product(s) without charge if it fails during the first ten years after installation solely due to a manufacturing defect.
This warranty is not transferable to assignable and applies only to AVIAN® solid surfacing material which is stored, handled, fabricated and installed in the manner recommended in the AVIAN® solid surfacing material guide. A copy may be obtained from any authorized distributor of AVIAN® solid surfacing material or by calling 519-461-0100.
The warranty does not cover damage caused by:
Failure to follow recommended procedures for storage, handling, fabrication or installation.
Physical abuse, damage from excessive heat, or breakage not due to a manufacturing defect in the product(s).Failure of any adhesive, caulk or other accessory, or failure of caulked or filled joint(s) or seam(s).
The 10 year limited warranty is only extended to the composite material and installations if performed by Coni-marble’s own qualified personnel. In which case the warranty commences at date for finished installation. Coni-marble is not responsible for installation cost of performed by a third party. The said warranty is applicable in Canada.
If you should experience problems with your AVIAN® product, please contact the business from which you made your purchase. If you are still unable to resolve the problem, please call 519-461-0100 for the name of your local distributor. When you call, please have your proof of purchase available
To assert a claim under this warranty, write to Coni-marble Manufacturing Inc., Box 40, Harrison Street, Thorndale, Ontario N0M 2P0. Include the phrase “AVIAN® solid surfacing material, 10 year Limited Warranty”, your name, address and a description of the problem. A response will be provided within 60 days.
CONI CAN MAKE NO IMPLIED OR EXPRESS WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND CAN MAKE NO OTHER WARRANTIES, EXPRESS, OR IMPLIED, OTHER THAN AS SET FORTH HEREIN. EXCEPT AS PROVIDED HEREIN, CONI SHALL NOT BE LIABLE IN TORT, CONTRACT, OR OTHERWISE, FOR ANY LOSS FOR DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR EXEMPLARY DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE AVAIN® SOLID SURFACE MATERIAL.
Corian Solid Surface:
Visit the manufacturer’s web site for details on their Residential and Commercial warranties:
Each manufacturer has their own warranty program. For detailed information, visit the manufacturer’s web site:
Corian Quartz: corianquartz.com
LG Viatera: lghausysusa.com/viatera
Neolith is a Sintered Stone. The warranty varies based on the thickness of the stone.
For more detailed information, visit the manufacturer’s web site at: